Native Instruments Traktor Audio 10 Interface Review
|
Native Instruments Traktor Audio 10 Interface Jump to a section - Staff Review - Information & Features - Pricing Information - User Reviews and Ratings - Submit Your Review - Related Articles |
Native Instruments Traktor Audio 10 Interface
Call us at (888) 890-6222 and mention DJBooth for special savings!
ProAudioStar is the Official Pro Audio Retailer of DJBooth.net
Native Instruments Traktor Audio 10 Interface Staff Review
Traktor Scratch Pro Hardware (Audio 10): TRAKTOR AUDIO 10 DJ is the successor of AUDIO 8 DJ, and now comes with enhanced connectivity, better sound quality, four decks of inputs/outputs and a MIDI connection for other devices. The four decks can all be toggled to support any combination of vinyl Phono turntables or CD Line playback devices.
The audio 10 claims to have a new processor for better performance and lower latency, but I was unable to discern the difference between the audio 4 and audio 10 in terms of processing power. I was very happy to see that the Native Instruments interfaces no longer need those proprietary multicore cables as you can now connect simple RCA connectors directly into the Audio 10 interface making the setup a lot easier.
The Audio 10 can also run in direct-through mode when not connected to a computer, this way DJ’s can still play music through it even when there is no software present. The Audio 10 now has very clear LED readouts that allow users to know what each input and output is doing right at a glance. The audio control panel for the Audio 10 is located within the software, making it easy to configure the inputs/outputs of the soundcard.
The Sound quality of the Audio 10 is great. It boasts a high-quality 24-bit and 96kHz Cirrus Logic AD/DA converters for studio grade quality. I would say that the Sound Quality of the Audio 10 is slightly better than last generations’ Audio 4 and Audio 8 interfaces. It was very hard for me to hear the difference between the two as I had to switch back and forth between the Audio 10 and Audio 4 in order to actually hear a very tiny difference. If you are using an Audio 8 or Audio 4 and you are looking to upgrade merely for sound quality, then you may find that the price of the Audio 10 isnt worth the slight improvement in sound. The Audio 8 and Audio 4 interfaces already sound great and the Audio 6 and Audio 10 will only prove to have very minor upgrades to the sound quality.
Conclusion:
The Traktor Scratch Pro 2 software and Hardware both have much needed upgrades that ties in with today’s popular 4-deck mixing style and allow users to switch between setups on the fly. For the Audio 10, the sound quality has been slightly improved and the additional MIDI input/output along with the MAIN input/output RCA connections open up the door to many more mixing possibilities. The Main inputs/output can be used for the new loop recorder and playback, or simply as a Master Output. You can now run a total of 4 analog turntables directly through the Audio 10. Each of the four deck inputs can now be controlled through the software to switch between vinyl or line level inputs depending on if you are using a CD deck or a vinyl turntable. The Audio 10 can also route outputs to four different decks making it the ideal soundcard for DJ’s who want to use a controller like the Denon DN-MC6000 or Numark NS6 along with two other external decks allowing for 4-full decks of control. The Audio 10 is built with a mostly metal construction and will last for years to come. The Audio 10 is very versatile and can also be used with any other DJ software on the market today. The only MINOR gripe that I can find with the TSP2 system is the lack of an additional USB connection so that two computers can connect to the system. This feature would make it easy to switch between DJ setups for club installations or for DJ’s who want to battle it out using two separate libraries of music.
Pro’s:
-(4) Decks of either Line or Phono Connectivity
-Solid Build Quality
-Lots of inputs and outputs (MIDI, Master, Headphones, etc…)
-Good Price when compared to competition
-Simplified RCA Cable connection (no more dongle cables needed)
Con’s:
-Lack of additional USB port for true 2-computer connectivity
Native Instruments Traktor Audio 10 Interface Features
Native Instruments Traktor Audio 10 DJ Audio Interface
Advanced DJ audio interface providing 10 inputs and 10 outputs for professional DJs requiring the ultimate in connectivity. The Native Instruments Traktor Audio 10 DJ Audio Interface is a powerhouse that sets the new benchmark for DJ audio interfaces. The successor of the highly acclaimed Traktor Audio 8 DJ has been carefully refined, now achieving a new level in connectivity and performance. With ten inputs, ten outputs, four phono preamps, MIDI I/O and mic input, Traktor Audio 10 will satisfy even the most demanding DJs.
This premium DJ audio interface from Native Instruments is built on the established and award-winning design of Native Instruments audio and hardware gear: Extra-robust metal casing, high-end Cirrus-Logic AD/DA converters, brand-new chip technology and completely revised driver architecture ensure top sound quality and low latency for professional use on stage and in the studio.
Native Instruments Traktor Audio 10 DJ Audio Interface Features
Professional DJ audio interface with unrivalled connectivity
10 inputs and 10 outputs - 4 phono preamps to connect up to four turntables
Extra-loud output levels pack enough punch to rock the biggest clubs
High-quality 24-bit / 96kHz Cirrus Logic AD/DA converters for studio-grade sound quality
Mic input and additional MIDI I/O port for MIDI gear without USB connector
New low latency Mac and PC drivers for tightest possible response
25 status LEDs for visual monitoring of signal chain
Easy club installation with Direct Thru mode and included power supply
Compatible with all DJ, performance and audio software
Includes Traktor DJ software so you can start mixing right away
Ultimate Connectivity
Even when routing four separate stereo outputs to a 4-channel mixer, there's still an additional output for various purposes. The additional stereo input on Traktor Audio 10 makes working with a send FX chain on your external mixer easy: Use each Traktor effect like it was a separate FX unit in your studio. Furthermore, the extra inputs and outputs offer yet more flexibility if you’re DJing with Traktor's Sample Decks and Loop Recorder.
The built in MIDI interface makes it possible to tempo-sync other music equipment like external drum machines, synthesizers or another computer with the tempo of your tracks. And thanks to its 4 phono preamps, Native Instruments Traktor Audio 10 allows to connect four turntables simultaneously.
Installation Friendly
Besides premium sound quality, low-latency and ultimate connectivity, this interface also boasts many other advanced features specifically designed for club use:
The convenient status LEDs on the upper panel give instant visual feedback on input and output activity, so you know if your setup is hooked up and working correctly. Now it’s also possible to run the Traktor Audio 10 via its power supply only, as a Direct Thru unit. This means the soundcard is capable of passing through a signal from other equipment (turntables / CD players) without being connected to your computer – so switching between DJs or different setups is finally made simple - perfect for permanent club installations.
Traktor LE 2
This included Native Instruments DJ software provides two playback decks to spin tracks directly from your hard drive, with full iTunes integration and iPod compatibility. The new TruWave colored waveforms and amazing beat-sync functions make it simple to use the advanced looping, cueing and effects – so go beyond ordinary mixing.
Native Instruments Traktor Audio 10 Specifications
System Requirements
PC:
Windows XP (latest Service Pack, 32 Bit)
Windows Vista (latest Service Pack, 32/64 Bit)
Windows 7 (latest Service Pack, 32/64 Bit),
Intel Pentium 4 or Intel Core or AMD Athlon 64, 2 GB RAM
Mac: OS X 10.5 (latest update) or 10.6 (latest update), Intel Core Duo, 2 GB RAM
Supported Drivers:
ASIO
Core Audio
DirectSound
WASAPI
Hardware
Audio Converters:
Channels (A/D, D/A): 10, 10
Sample Rates: 44.1, 48, 88.2, 96 kHz
Bit Resolution: 16, 24 Bit
Converter: Cirrus Logic
Dimensions: 1.8 x 7.6 x 5.7 inches (45x192x144mm)
Weight: 950 g / 2.09 lbs
Best Price for the Native Instruments Traktor Audio 10 Interface
Native Instruments Traktor Audio 10 Interface
Call us at (888) 890-6222 and mention DJBooth for special savings!
ProAudioStar is the Official Pro Audio Retailer of DJBooth.net
Submit a Review and/or Rating
Member Reviews and Ratings
Native Instruments Traktor Audio 10 Interface Related Links
Additional Reviews:
|
Other DJ Equipment Reviews |
Equipment by Manufacturer |
Recent DJ Equipment Videos
Search for DJ Equipment
DJ Booth Newsletter
Sign up to receive a weekly recap of our top stories, videos and reviews.
